General
    HLJ series slurry pump is single-stage single-suction vertical overhung centrifugal submersible pump. Impeller is half-open, there are grind cover before and behind impeller. It is used to transport grind and corrosive medium which contain less than 30% solid grain and less than 200 CP density in chemical process, especially used in transporting phosphide.
    The medium temperature is under 110¡æ. Cooling water pipe and cooling bearing are used for higher temperature medium.
    Performance range: capacity Q=10~400m3/h   Head H=50

Table of property parameters

Type	Q Capacity	H Head (m)	Speed	kw)
	(m3/h)		(r/min)
10HLJ18-4	10	18	1450	4
10HLJ30-4	10	30	1450	5.5
15HLJ18-4	15	18	1450	5.5
15HLJ30-4	15	30	1450	7.5
20HLJ25-4	20	25	1450	7.5
27HLJ20-4	27	20	1450	7.5
30HLJ30-4	30	30	1450	11
45HLJ20-4	45	20	1450	15
54HLJ20-6	54	20	980	15
60HLJ20-4	60	20	1450	15
85HLJ25-4	85	25	1450	22
110HLJ25-4	110	25	1450	30
160HLJ32-4	160	32	1450	45
160HLJ32-4A	150	26	1450	37
200HLJ32-4	200	32	1450	55
200HLJ32-4A	180	26	1450	45
300HLJ32-4	300	32	1450	75
300HLJ32-4A	270	26	1450	55
400HLJ32-4	400	32	1450	90
400HLJ32-4A	350	25	1450	75